Microstack Baseboard

Umsögn(0)

3.353 kr

4.790 kr

Sparaðu 30%

Með vsk.Innan 2-3 daga

Síðustu vörur á lager

The Microstack baseboard for Raspberry Pi brings the world of Microstack modules to the amazing world of Raspberry Pi.

Product Overview

The Microstack baseboard for Raspberry Pi brings the world of Microstack modules to the amazing world of Raspberry Pi. This baseboard can be used with Raspberry Pi model A and B and the newer A+ and B+ versions. It routes the appropriate GPIO pins of the Raspberry Pi to sockets to connect Microstack modules. The onboard 3.3V regulator makes enough current available to power a stack of Microstack modules, separate from the limited 3.3V supply on the Raspberry Pi. The 5V supply to the regulator and some Microstack modules can either be supplied from the Raspberry Pi or via an additional, onboard 5V microusb socket. The unique multi colour PCB and polarised sockets help ensure the correct modules are fitted in the correct orientation in the correct socket.

Fully supported with Microstack Node Python Library
Quick to get started on Raspberry Pi with simple to install drivers
Unique colour coded PCB for simplicity
Onboard 3.3V power regulator takes the load of the Raspberry Pi's 3.3 volt power rail

ESD sensitive device. Precaution should be used when handling the device in order to prevent permanent damage.

If Microstack is powered via its microusb connector, then remove jumper to prevent the power flowing into Raspberry Pi.

Product Information

Silicon Manufacturer:: Broadcom
Core Architecture:: ARM
Core Sub-Architecture:: ARM11
Silicon Core Number:: BCM2835
Silicon Family Name:: BCM2xxx
For Use With:: Compatible with Raspberry Pi 2 Model B, Raspberry Pi B+/A+/B/A
Kit Contents:: Add-on Adapter Base Board
Product Range:: -
Features:: Allows to Connect Microstack Sensors, Unique Colour Coded PCB for Simplicity, 3.3V Regulator