DeoxIT® D-Series D100S Spray, 100% solution, 57 g, no solvents, metered one-shot valve dispenses 100% DeoxIT®, 
(Applications = 500 +/-)

Description

DeoxIT® D-Series – Contact Cleaner & Rejuvenator

Part No. D100S-2:
100% Spray, No solvents

Applicator: Spray, provides NO flushing action, applies 100% DeoxIT® using a metered one-shot valve.
Formulation:   20% DeoxIT® (active ingredient), 80% propellant
Use: When solvents are not required or materials are sensitive to any solvents. No flushing action.  Spray provides application of DeoxIT® on connectors and components that are not easily accessible.
Notes: Use when over spray is an issue and on sensitive materials. Formulation safe on plastics. On easily accessible surfaces, recommend wiping off excess, leaving a thin layer.

More than a Contact Cleaner . . . Improves & Protects Connections!

DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.

KEY FEATURES:

• Improves Conductivity
• Deoxidizes, Cleans and Preserves
• Reduces Intermittent Connections
• Reduces Arcing & RFI
• Reduces Wear & Abrasion
• Temperature Range, -34 C (-29 F) to +200 C (400 F)